Econoline E350 1 Ton V8-5.4L CNG VIN M (1999)
Seals and Gaskets: Service and Repair
4R100
Special Tools
Removal
1. Raise and support the vehicle.
2. Remove the driveshaft.
3. With a suitable drain pan properly positioned, remove the (A) extension housing seal, using the (B) Seal Remover and the (C) Impact Slide
Hammer.
4. CAUTION: Do not damage any machined surfaces. The new seal may leak.
Using the (A) Extension Housing Bushing Remover, (model dependent) remove the(B) extension housing bushing.