Econoline E350 1 Ton V8-5.4L CNG VIN M (1999)
2. Install the new extension housing seal.
1
Align Extension Housing Seal Replacer with the seal.
2
Install the extension housing seal.
3. Install the transmission insulator and retainer.
4. Install the harness bracket. Reconnect the catalyst monitoring sensor harness connectors.
5. Install the VSS.
1
Install the VSS.
2
Install the bolt.
3
Connect the electrical connector.
6. Install the driveshaft.
7. Remove the supports and lower the vehicle.
8. Connect the battery ground cable.
