Econoline E350 1 Ton V8-5.4L CNG VIN M (1999)
5. Disconnect the catalyst monitoring sensor harness connectors. Remove the harness bracket.
6. Remove the transmission insulator and retainer.
7. Use the (A) Seal Remover and the (B) Impact Slide Hammer to remove the (C) extension housing seal.
8. Remove the extension housing and gasket.
1
Remove the bolts and nuts.
2
Remove the extension housing and gasket.
Installation
1. Install the extension housing and gasket.
1
Position the extension housing gasket and the extension housing.
2
Install the bolts and nuts.
