Econoline E350 1 Ton V8-7.3L DSL Turbo VIN F (1998)
5. Lower the vehicle.
6. Connect the heater water outlet tubes.
7. Connect tile A/C evaporator core fitting.
1. Lubricate the new O-rings with Motorcraft YN-12c refrigerant oil or equivalent meeting Ford specification WSH-M1C231-B and install the
O-rings.
2. Connect the A/C evaporator core fitting.
3. Install the screw.
CAUTION: Use a wrench on each side of the fitting to prevent damage to the A/C fitting.
8. Connect the condenser core refrigerant lines.
1. Lubricate the new O-rings with Motorcraft YN-12c refrigerant oil or equivalent meeting Ford specification WSH-M1C231-B and install the
O-rings.
2. Connect the condenser to evaporator tube.
3. Connect the compressor discharge line.
CAUTION: Use a wrench on each side of the fitting to prevent damage to the A/C fitting.