Econoline E550 V10-6.8L VIN S (2003)
Brake Pad: Service and Repair
Rear
Brake Pads - E-550
Removal and Installation
1. Remove the brake master cylinder filler cap. Check the brake fluid level in the brake master cylinder reservoir. Remove fluid until the brake
master cylinder reservoir is half full.
2. Remove the wheel and tire assembly.
3. Inspect the brake pads for wear or contamination. If worn, damaged, or past specification, install new brake pads.
4. Remove the caliper pin bolts.
5. CAUTION: Never allow the rear disc brake caliper to hang from the brake hose. Provide suitable support.
Remove the rear disc brake caliper.
