Econoline E550 V10-6.8L VIN S (2003)
6. Disconnect the A/C evaporator core fitting.
1
Remove the screw.
2
Disconnect the A/C evaporator core fitting.
CAUTION: Use a wrench on each side of the fitting to prevent damage to the A/C fitting.
7. Remove the four clamps.
1
Remove the screw.
2
Remove the clamp.
8. Raise the vehicle.
9. Disconnect the underbody tube spring lock coupling.
10. Lower the vehicle.
11. Remove the condenser to evaporator tubes.
INSTALLATION
1. Service the new condenser to evaporator tube with the correct amount of PAG Refrigerant Compressor Oil (R-134a Systems) F7AZ-19589-DA
(Motorcraft YN-12-C) or equivalent meeting Ford specification WSH-M1C231-B.
2. Route the condenser to evaporator tube.
3. Raise the vehicle.
