Econoline E550 V10-6.8L VIN S (2003)
Special Tool(s)
Removal
1. Remove the pinion flange.
2. Force up on the metal flange of the pinion seal. Install gripping pliers and strike with a hammer until the pinion seal is removed.
Installation
1. Lubricate the new pinion seal.
^
Use Premium Long-Life Grease XG-1-C or equivalent meeting Ford specification ESA-M1C75-B.
2. CAUTION: If the pinion seal becomes misaligned during installation, remove the seal and install a new one.
Using the special tool, install the pinion seal.
3. Install the pinion flange.
