Edge AWD V6-3.5L (2009)
WARNING: Do not smoke, carry lighted tobacco or have an open flame of any type when working on or near any fuel-related component.
Highly flammable mixtures are always present and may be ignited. Failure to follow these instructions may result in serious personal injury.
NOTICE: During engine repair procedures, cleanliness is extremely important. Any foreign material, including any material created while
cleaning gasket surfaces that enters the oil passages, coolant passages or the oil pan, can cause engine failure.
All vehicles
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Recover the A/C system.
3. Release the fuel system pressure.
4. Drain the engine cooling system.
5. Remove the accessory drive belt and the power steering belt.
6. Remove the LH halfshaft and intermediate shaft.
7. Disconnect the power steering cooler hose and drain the power steering fluid into a suitable drain pan.
8. Remove the degas bottle.
9. Remove the engine Air Cleaner (ACL) and ACL outlet pipe.
