Edge AWD V6-3.5L (2009)
4. Install the 2 engine mount studs.
-
Tighten to 20 Nm (177 lb-in).
12. Install the engine mount bracket and the 2 bolts.
-
Tighten to 30 Nm (22 lb-ft).
13. Install the engine mount and the 3 bolts.
-
Tighten to 90 Nm (66 lb-ft).
14. Install the 4 engine mount nuts.
-
Tighten to 63 Nm (46 lb-ft).
15. Install the engine mount brace, nut and bolt.
-
Tighten to 20 Nm (177 lb-in).
16. Tighten the transaxle mount through bolt to 175 Nm (129 lb-ft).