Escape 2WD L4-122 2.0L DOHC VIN B SFI (2001)
10. Remove the special tool from the passenger seat safety belt pretensioner body harness electrical connector.
WARNING: THE RESTRAINT SYSTEM DIAGNOSTIC TOOL IS FOR RESTRAINT SYSTEM SERVICE ONLY. REMOVE FROM
VEHICLE PRIOR TO ROAD USE. FAILURE TO REMOVE COULD RESULT IN INJURY AND POSSIBLE VIOLATION OF
VEHICLE SAFETY STANDARDS.
11. Connect the passenger seat safety belt pretensioner electrical connector.
12. Connect the battery ground cable.
13. With the remaining special tools still in place, prove out the air bag system.
14. Disconnect the battery ground cable and wait at least one minute.
15. Remove the special tool from the driver seat safety belt pretensioner body harness electrical connector.
WARNING: THE RESTRAINT SYSTEM DIAGNOSTIC TOOL IS FOR RESTRAINT SYSTEM SERVICE ONLY. REMOVE FROM
VEHICLE PRIOR TO ROAD USE. FAILURE TO REMOVE COULD RESULT IN INJURY AND POSSIBLE VIOLATION OF
VEHICLE SAFETY STANDARDS.
