Escape 2WD L4-122 2.0L DOHC VIN B SFI (2001)
Fuel Rail: Service and Repair
Fuel Pipe 1/2 Inch Remover
SPECIAL TOOL(S)
REMOVAL
WARNING:
^
DO NOT SMOKE OR CARRY LIGHTED TOBACCO OR OPEN FLAME OF ANY TYPE WHEN WORKING ON OR NEAR ANY
FUEL-RELATED COMPONENTS. HIGHLY FLAMMABLE MIXTURES ARE ALWAYS PRESENT AND MAY BE IGNITED.
FAILURE TO FOLLOW THESE INSTRUCTIONS MAY RESULT IN PERSONAL INJURY.
^
FUEL IN THE FUEL SYSTEM REMAINS UNDER HIGH PRESSURE EVEN WHEN THE ENGINE IS NOT RUNNING. BEFORE
WORKING ON OR DISCONNECTING ANY OF THE FUEL LINES OR FUEL SYSTEM COMPONENTS, THE FUEL SYSTEM
PRESSURE MUST BE RELIEVED. FAILURE TO FOLLOW THESE INSTRUCTIONS MAY RESULT IN PERSONAL INJURY.
1. Relieve the fuel system pressure.
2. Disconnect the battery ground cable.
3. Remove the air cleaner outlet pipe.
4. Using the special tool, disconnect the fuel line.
5. Disconnect the accelerator cable and, if equipped, the speed control actuator cable.
