Escape 2WD L4-122 2.0L DOHC VIN B SFI (2001)
Parts Ordering Information
Parts will not be direct shipped for this recall. Order your parts requirement through the Recall Hotline (1-800-325-5621). Parts will be shipped Priority
Next Day delivery.
NOTE:
Removed parts must be mutilated and properly scrapped to prevent their use on another vehicle.
ORDER INFORMATION DOR/COR
DOR/COR number 50175 identifies parts ordered for this campaign through the Recall Hotline (1-800-325-5621).
DEALER PRICE
^
DOES II
^
Updated Price Book
EXCESS STOCK RETURN
Excess stock returned for credit must have been purchased from Ford Customer Service Division in accordance with Policy Procedure Bulletin 4000
Special Service Instruction - Attachment III
OVERVIEW
This program combines two procedures, a driveshaft replacement and a differential leak inspection/repair. These two procedures are closely related, and
performing them together will save time.
DRIVESHAFT REPLACEMENT:
All affected vehicles will have a new driveshaft installed.
DIFFERENTIAL LEAK INSPECTION/REPAIR:
The mass damper is a weight bolted to the right side of the differential assembly. The damper may have been installed using the wrong tightening
sequence. When installed incorrectly the damper does not contact all three mounting pads as the bolts are tightened. This creates a leak in the silicone
seal between the rotary blade coupling housing and the differential housing. An inspection will be performed to identify leaking differential assemblies.
If a leak is found, the coupling housing will be removed and resealed with silicone (F7TZ-1 9554-AA). The damper will be reinstalled using the correct
tightening sequence.
INSPECTION
1.
Raise and support the vehicle.
