Escape 2WD L4-122 2.0L DOHC VIN B Zetec SFI (2003)
1
Disconnect the electrical connector.
2
Disconnect the electrical harness pin-type retainers.
3
Remove the nuts.
6. Raise and support the vehicle.
7. Remove the RH splash shield.
8. If equipped, disconnect the engine block heater electrical connector.
9. Disconnect the A/C clutch field coil electrical connector.
10. Remove the A/C manifold and tube assembly bolt.
CAUTION: Plug all ports to prevent contamination from dirt or moisture.