Escape 2WD L4-2.5L Hybrid (2010)
Front Door Hinge: Adjustments
Door Alignment - Front
All alignments
NOTE: Driver side shown, passenger side similar.
1. Remove the door latch striker plate.
Front door in and out, up and down alignment
2. Loosen, but do not remove, the front door hinge-to-front door fasteners enough to allow door alignment.
Front door fore, aft and tilt alignment
3. Remove the front fender.
4. Loosen, but do not remove, the upper front door hinge-to-body fasteners enough to allow door alignment.
5. Remove the front door scuff plate.
6. Partially remove the front door weatherstrip.
7. Remove the lower cowl trim panel.
-
Remove the pin-type retainer.
-
Remove the lower cowl trim panel.
8. Remove the front door hinge-to-body bolts inside at the inside A-pillar.
