Escape 2WD L4-2.5L Hybrid (2010)
Rear Door Exterior Handle: Service and Repair
Exterior Rear Door Handle
Exterior Rear Door Handle
Removal and Installation
1. Remove the rear door trim panel.
2. Position the water shield aside.
3. Remove the rear window channel bolt and position the window channel aside.
-
To install, tighten to 8 Nm (71 lb-in).
4. Remove the exterior rear door handle cover retaining screw from the door handle reinforcement.
5. Remove the exterior rear door handle bezel.
1. Pull the exterior rear door handle open.
2. Pivot the rear of the exterior rear door handle bezel and remove.
