Escape 2WD V6-3.0L VIN 1 (2004)
11. NOTE: Lubricate the urethane adhesive with water to aid the special tool when cutting.
Using the special tool, cut the urethane adhesive from the windshield glass starting at the top center and work toward the bottom corners.
12. Using the special tool, distance the windshield glass from the body.
13. Using the special tool, cut the remaining urethane adhesive and remove the windshield glass.
14. Using a soft brush or vacuum, remove any foreign material or dirt from the pinch weld.
INSTALLATION
CAUTION: After installing the urethane installed glass, the vehicle should not be driven until the urethane adhesive has cured. The curing
times at temperatures above 13°C (55°F) and relative humidity above 50% is 12-24 hours (Refer to the Essex drive away chart for the cure
times as temperatures and humidity vary). Inadequate curing of the urethane adhesive may adversely affect the strength of the urethane bond.
1. Dry fit the windshield glass, making alignment marks with tape or non-staining grease pencil.
