Escape 4WD V6-181 3.0L DOHC VIN 1 Duratec (2003)
15. Disconnect the passenger air bag module electrical connector.
16. Connect the special tool to the instrument panel harness side of the passenger air bag module electrical connector.
17. Connect the battery ground cable.
18. Prove out the air bag system.
19. Remove the seat track to floor nuts.
20. Position the passenger seat rearward.
21. CAUTION: Use care when handling the seat and track assembly. Dropping the assembly or sitting on a seat not secured in the vehicle
may result in damaged components.
Remove the passenger seat.
1
Remove the seat track to floor bolts.
2
Remove the passenger seat.
