Escape 4WD V6-181 3.0L DOHC VIN 1 Duratec (2003)
11. Install the snap ring.
12. Lubricate the three tripod joint needle bearings.
^
Use Ford High Temp Constant Velocity Joint Grease E43Z-19590-A or equivalent meeting Ford specification ESP-M1C207A.
13. Fill the tripod joint housing with Ford High Temp Constant Velocity Joint Grease E43Z-19590-A or equivalent meeting Ford specification
ESP-M1C207A.
14. Position the tripod housing onto the tripod.