Escape 4WD V6-3.0L (2008)
Removal
CAUTION: During engine repair procedures, cleanliness is extremely important. Any foreign material (including any material created while
cleaning gasket surfaces) that enters the oil passages, coolant passages or the oil pan may cause engine failure.
1. Remove the LH ignition coil-on-plugs.
2. If equipped, remove the bolt and the engine lift bracket.
3. Remove the 2 bolts and the accelerator cable snow shield.
4. CAUTION: Do not disconnect the crankcase ventilation tube from the valve cover or damage to the ventilation tube may occur.