Escape 4WD V6-3.0L (2008)
Part 2
Removal
1. Remove the A/C compressor.
2. Remove the A/C clutch disc and hub bolt.
1
Using a suitable spanner-type wrench, hold the A/C clutch disc and hub.
2
Remove the A/C clutch disc and hub bolt.
3. Remove the A/C clutch disc and hub and the A/C clutch disc and hub spacer(s).
4. Remove the A/C compressor pulley snap ring.
5. CAUTION: Do not use air tools. Damage to the A/C clutch pulley or A/C compressor may result.
Remove the A/C compressor pulley.
1
Install the special tool.
2
Install a suitable 3-jaw puller on the special tool and A/C compressor pulley.
3
Remove the A/C compressor pulley.
6. Remove the 4 A/C clutch field coil screws.
7. Remove the A/C clutch field coil.
Installation
