Escape 4WD V6-3.0L (2008)
11. Install a new pressure tap plate gasket.
12. Install the pressure tap plate and bolts.
^
Tighten to 8 Nm (71 lb-in).
13. NOTE: Match the solenoid valve body gasket to passages.
Install the solenoid valve body.
1
Install the solenoid valve body gasket.
2
Install the solenoid valve body.
3
Install the 2 solenoid valve body bolts.
^
Tighten to 10 Nm (89 lb-in).
14. Install the manual valve.