ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Air Bag System Reconnect Checklist|Page 5529 > < Air Bag System Reconnect Checklist|Page 5527
Page 3
background image

13. Remove the passenger air bag module retaining bolts.

 

14. Pull the passenger air bag module out of the instrument panel, and disconnect the passenger air bag module electrical connector.

 

15. Remove the passenger air bag module.
16. Attach the restraint system diagnostic tool 418-F088 to the vehicle harness side of the of the passenger air bag module electrical connector.
17. Install the ECS module fuse AIR BAG (10A) to the CJB and install ECS module fuse FUEL INJ (30A) to the BJB.
18. Connect the battery ground cable. 

Reactivation Procedure

1. Remove the ECS module fuse AIR BAG (10A) from the CJB, and remove the ECS module fuse FUEL INJ (30A) to the BJB.
2. Disconnect the battery ground cable and wait at least one minute. 
3. Remove the restraint system diagnostic tool from the vehicle harness side of the passenger air bag module electrical connector.
4. Connect the passenger air bag module electrical connector.

 

Air Bag System Reconnect Checklist|Page 5529 > < Air Bag System Reconnect Checklist|Page 5527