ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Steering Gear|Removal|Page 7614 > < Steering Gear|Removal|Page 7612
Page 2
background image

6. Turn off the ignition after all the fluid has been added and reconnect the ignition coil electrical connector.

7. Remove the plug from the reservoir return tube and attach the power steering return hose to the power steering pump reservoir.
8. Check the fluid level and if necessary, add fluid to the proper level.
9. Lower the vehicle.

10. Start the engine and cycle the steering wheel from stop-to-stop to expel any trapped air from the system.

Steering Gear|Removal|Page 7614 > < Steering Gear|Removal|Page 7612