Escort L4-122 2.0L SOHC VIN P SFI (1999)
3. Use the supplied wool applicator to apply Urethane Glass Primer meeting Ford specification WSB-M2G314-B.
^
Apply Urethane Glass Primer around the entire outer edge of the inside of the windshield glass directly inside the blackout ceramic coating.
^
Allow ten minutes drying time.
WARNING: IF PRIMER GETS ON YOUR HANDS, REMOVE IT IMMEDIATELY. WEAR RUBBER, LATEX OR NITRILE
GLOVES WHEN WORKING WITH PRIMERS AND URETHANE ADHESIVE.
CAUTION: Do not apply urethane glass primer inside of the blackout ceramic coating, the primer will permanently discolor the windshield glass.
4. Install Norton Foam Sealants 565 Black Foam Tape or equivalent meeting Ford specification ESB-M3G77-A.
^
Start at the bottom of the windshield glass and install the tape all the way around the inside of the perimeter to specification.
5. Cut the nozzle of the Urethane Sealant canister to specification.
6. Install the windshield outside moulding around the top and sides of the windshield glass then tape to hold in place.
