Excursion 2WD V10-6.8L VIN Z CNG (2003)
7. Install the second row shoulder safety belt guide.
1
Position the shoulder safety belt guide.
2
Install the nut.
3
Close the shoulder safety belt guide cover.
NOTE:
^
Make sure the safety belt webbing is not twisted prior to installation.
^
Inspect the shoulder safety belt guide and cover for damage. If the shoulder safety belt guide or cover is damaged or cover does not remain
closed, install a new shoulder safety belt guide.
8. Remove the shipping clip(s) from the safety belt retractor(s).
9. Position the quarter trim panel and push in on it securing the fasteners.
NOTE: Driver side is shown, passenger side is similar.
