Excursion 2WD V10-6.8L VIN Z CNG (2003)
8. CAUTION: Install new bolts.
NOTE: Bolt direction is vehicle application dependent.
Loosely install the four new bolls.
Vehicles with split pin yoke
9. CAUTION: Install new bolts and new retainers.
Install the two new retainers and four new bolts.
Vehicles with circular flange
10. CAUTION: The driveshaft yoke fits tightly on the rear axle pinion flange pilot. To make sure that the yoke seats squarely on the flange, tighten
the bolts evenly in a cross pattern as shown.
Tighten the four new bolts.