Expedition 2WD V8-281 4.6L VIN W EFI (1997)
2. Install the converter housing access plug.
CAUTION: If replacing the filter, and the seal remains in the main control bore, carefully use a small screwdriver to remove the seal. Use care
not to damage the main control bore.
NOTE: If the transmission is being repaired for a contamination-related failure, use a new filter and seal. The filter may be reused if no excessive
contamination is present.
3. Replace the fluid filter and seal as required.
4. Position the pan magnet into the transmission fluid pan.
5. Install the transmission fluid pan and gasket.
(1) Position the transmission pan gasket.
(2) Position the transmission fluid pan.
