Expedition 2WD V8-281 4.6L VIN W EFI (1997)
12. Remove the manual control lever shaft seal.
CAUTION: Use care not to damage the manual control lever shaft bore.
INSTALLATION
1. Use (A) Shift Lever Seal Replacer to install the (B) manual control lever seal.
2. Install the (A) manual valve detent lever and (B) parking lever actuating rod.
3. Install the manual control lever shaft.
(1) Install the manual control lever shaft.
(2) Install the inner manual control lever shaft nut.
(3) Install the manual lever shaft retaining pin.
