Expedition 2WD V8-281 4.6L VIN W EFI (1997)
4. Install the manual valve detent lever spring.
(1) Position the manual valve detent lever spring.
(2) Install the manual valve detent lever spring bolt.
5. Install the TR or DTR sensor.
(1) Position the TR or DTR sensor.
(2) Loosely install the two bolts.
NOTE: Use the Digital Transmission Range (DTR) Sensor Alignment Tool for both DTR and TR sensors.
6. Use Digital Transmission Range (DTR) Sensor Alignment Tool to align the TR and DTR sensor slots.
NOTE: Manual shift lever must be in the neutral position.
7. Tighten the DTR or TR sensor bolts and remove the Digital Transmission Range (DTR) Sensor Alignment Tool.