Expedition 2WD V8-281 4.6L VIN W EFI (1997)
10. Remove the differential case from the vise.
11. Install the differential pinion shaft.
(1) Position the differential pinion shaft.
(2) Install the differential pinion shaft lock bolt.
12. Press the new (A) anti-lock speed sensor ring and the (B) ring gear onto the differential case.
NOTE: Thread two bolts into the ring gear while pressing to align the bolt holes.
13. Install the remaining ring gear bolts.
-
Apply Stud and Bearing Mount EOAZ-19554-BA or equivalent meeting Ford specification WSK-M2G349-A1 to the ring gear bolts.
