Expedition 2WD V8-281 4.6L VIN W EFI (1997)
22. Remove the speed sensor ring.
NOTE: The speed sensor ring cannot be reused once removed.
23. Install the differential case.
(1) Position the differential case assembly, including shims, in the axle housing.
(2) Install the differential bearing caps.
(3) Install the bolts.
24. Position Dial Indicator with Bracketry.
(1) Rotate the differential case to ensure the differential bearings are properly seated.
(2) Position Dial Indicator with Bracketry.
25. Measure the differential case runout without the ring gear.
(1) Rotate the differential case.
