Expedition 2WD V8-281 4.6L VIN W EFI (1997)
19. Use a press and Pinion Bearing Cone Remover to remove the differential pinion bearing.
20. Remove the pinion seal.
21. Remove the oil slinger and the outer differential pinion bearing.
22. If the pinion bearing cups are damaged, use a suitable brass drift to remove the differential bearing cups.
NOTE:
-
Do not remove the pinion bearing cups from the axle housing unless the pinion bearing cups are damaged.
-
Tap alternately on opposite sides of the cups to prevent them from cocking in the bore.
