Expedition 2WD V8-281 4.6L VIN W EFI (1997)
10. Remove the differential case.
(1) Remove the bolts.
(2) Remove the bearing caps.
(3) Remove the differential case.
11. Install a Nm (Inch lbs) torque wrench on the pinion nut and record the torque required to maintain rotation of the pinion through several
revolutions.
12. Use (B) Companion Flange Holding Tool to hold the (A) rear axle companion flange while removing the (C) pinion nut.
13. Mark the (A) rear axle companion flange in relation to the (B) drive pinion stem to ensure proper alignment during installation.
