Expedition 2WD V8-281 4.6L VIN W EFI (1997)
2. Remove the differential pinion shaft.
(1) Remove the lock bolt.
(2) Remove the differential pinion shaft.
CAUTION: Once the differential pinion shaft has been removed, turning the differential case or an axle shaft will cause the differential pinion
gears to fall out of the assembly. This could result in chipped or damaged components.
3. Install the two axle shafts.
CAUTION: Do not damage the axle shaft oil seal.
4. Install the U-washers.
(1) Position the two U-washers on the button end of the axle shaft.
(2) Pull the axle shafts outward.
CAUTION: Do not damage the rubber O-rings in the axle shaft grooves.