Expedition 4WD V8-5.4L SOHC VIN 5 (2005)
4. Loosen the clamp.
LH converter only
5. NOTE: Use caution removing the catalytic converter. Make sure not to damage the manifold outlet flare, the converter inlet flare or the studs.
Separate and remove the LH converter.
RH converter only
6. Remove and discard the bolts and flag nuts at the RH converter-to-muffler flange.
7. Using a suitable jack stand, support the muffler.
8. Detach the isolators from the muffler assembly.
9. Lower the muffler assembly.
10. NOTE: Use caution removing the catalytic converter. Make sure not to damage the manifold outlet flare, the converter inlet flare or the studs.
Remove the bolt, isolator cap and the RH converter.
Both RH and LH converters
