ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Automatic Transmission - 4R70E/4R75E|Page 5659 > < Automatic Transmission - 4R70E/4R75E|Page 5657
Page 4
background image

7. Start the engine and run it at idle with the transmission in NEUTRAL.
8. When fluid flows from the hose in a steady stream, a liberal amount of fluid should be observed.  Liberal is about 1 liter (1 quart) delivered in 15

seconds. If a liberal flow is observed, the test is complete.

9. If the flow is not liberal, stop the engine. Disconnect the hose from the cooler return line and connect it to the converter outlet fitting (bottom

fitting) on the transmission case.

10. Repeat steps 6 and 7. If flow is now approximately 1 liter (1 quart) in 15 seconds, refer to Transmission Fluid Cooler - Backflushing and

Cleaning. If the flow is still not approximately 1 liter (1 quart) in 15 seconds, repair or install pump and or converter.

Automatic Transmission - 4R70E/4R75E|Page 5659 > < Automatic Transmission - 4R70E/4R75E|Page 5657