Explorer 2WD V6-245 4.0L SOHC VIN E EFI (1997)
Installing Front Wheel/Tire Assemblies
-
Install the rear disc brake caliper.
1. Install the rear disc brake caliper.
2. Install the rear disc brake caliper to rear disc brake caliper anchor plate bolts.
NOTE: If equipped with air suspension, reactivate the system by turning on the air suspension switch.
Relieving Tension On Parking Brake System
-
Install the front wheel and tire assemblies.
1. Install the wheel and tire assemblies.
2. Install the lug nuts and lower the vehicle.
3. Tighten the lug nuts.
4. Install the center cap.
-
Apply tension to the parking brake system.
1. Hold the front parking brake cable and conduit taught.
2. Remove the retainer.
