Explorer 2WD V6-245 4.0L SOHC VIN E EFI (1997)
3. Remove the RH camshaft tensioner.
-
If using a new washer, tighten to 44 Nm (32 lb-ft).
-
If using the old washer, tighten to 67 Nm (49 lb-ft).
4. To install, reverse the removal procedure.
3. Remove the RH camshaft tensioner.
-
If using a new washer, tighten to 44 Nm (32 lb-ft).
-
If using the old washer, tighten to 67 Nm (49 lb-ft).
4. To install, reverse the removal procedure.