Explorer 2WD V6-245 4.0L SOHC VIN E EFI (1997)
6. Install the transmission case (16 pin) electrical connector.
-
Lubricate the transmission case (16 pin) electrical connector O-rings with petroleum jelly.
NOTE:
-
Make sure the tab is in the lock position.
-
Install new o-rings on the transmission case (16 pin) electrical connector.
7. .Press the transmission case (16 pin) electrical connector through the case until a click is heard.
CAUTION: Align the slot on the TSS sensor electrical connector with the slot in the 16 pin case connector.
8. Install the TSS sensor wire.
(1) Install the TSS sensor wire into (16 pin) electrical connector.
(2) Install the TSS sensor wire into locator.
