Explorer 2WD V6-245 4.0L SOHC VIN E EFI (1997)
9. Install the transmission case (16 pin) electrical connector retaining spring.
CAUTION: Do not overstretch the retaining spring.
10. Install the EPC, SS4, and SS2 solenoids.
11. Install the solenoid clamp.
(1) Position the solenoid clamp on the main control valve body.
(2) Install the solenoid clamp bolts.
CAUTION: The solenoid clamp must be installed in the TCC and EPC solenoid grooves, shift solenoid pockets and the No. 204 plug.