Explorer 2WD V6-245 4.0L SOHC VIN E EFI (1997)
NOTE: Discard all main control to case gaskets.
5. Remove valve body separator plate and main control to case gasket.
(1) Remove valve body separator plate.
(2) Remove main control to case gasket and discard.
6. Remove the extension housing lube orifice and the metal silver electronic pressure control (EPC) limit relief valve and spring.
(1) Remove the extension housing lube orifice.
(2) Remove the silver metal EPC limit relief valve and spring.
7.Remove the black plastic converter relief valve and spring.
8. Remove the electronic pressure control (EPC) limit circuit screen.
