Explorer 2WD V6-245 4.0L VIN X SFI (1999)
7. Remove the door latch.
1. Remove the screws.
2. Disconnect the door latch from the power door lock actuator.
3
Remove the door latch.
8. Disconnect the door latch push button rod from the door latch.
INSTALLATION
1. To install, reverse the removal procedure.
NOTE:
-
Connect the remote control rod, door latch push button rod and lock cylinder rod to the front door latch before installing the new latch.
-
When the battery is disconnected or reconnected, some abnormal drive symptoms may occur while the vehicle relearns its adaptive strategy.
The vehicle may need to be driven 16 km (10 miles) or more to relearn the strategy.
