Explorer 2WD V6-245 4.0L VIN X SFI (1999)
Front Door Panel: Service and Repair
REMOVAL
NOTE:
-
High series shown, low series similar.
-
The window must be completely down to remove the front door trim panel.
1. On high series front door trim panel, disconnect the battery ground cable.
2. Remove the screws.
3. Remove the inside door handle cup.
4. On low series front door trim panel, remove the screw and the window regulator handle.
5. Start in a lower corner and work around the panel and separate the front door trim panel from the front door to disengage the pin-type retainers.