Explorer 2WD V6-245 4.0L VIN X SFI (1999)
Rear Door Panel: Service and Repair
REMOVAL
NOTE:
-
High series shown, low series similar.
-
The window glass must be completely down to remove the rear door trim panel.
1. Remove the screws.
2. Remove the inside door handle cup.
3. On low series rear door trim panel, remove the window regulator handle.
-
Remove the screw.
4. Start in a lower corner and work around the panel and separate the rear door trim panel from the rear door to disengage the pin-type retainers.
