Explorer 2WD V6-245 4.0L VIN X SFI (1999)
7. Connect the liftgate window latch actuating rod.
1. Position the liftgate window latch actuating rod.
2. Close the clip.
8. Tighten the liftgate latch remote control bolt.
9. Connect the lock cylinder rod.
1. Position the lock cylinder rod.
2. Close the clip.
NOTE: Be sure the bell crank of the liftgate latch remote control is in the unlocked position (upward) for proper lock cylinder rod length.
10. Connect the liftgate handle rod.
1. Position the liftgate handle rod.
