Explorer 2WD V6-4.0L VIN K Flex Fuel (2002)
12. Remove the RH and LH radiator brackets.
1
Remove the bolts.
2
Remove the brackets.
NOTE: RH radiator bracket is shown, LH similar.
13. Remove the RH and LH condenser core brackets.
1
Remove the bolts.
2
Remove the brackets.
14. Position the air deflectors to clear the brackets and remove the condenser core.
15. Detach the air deflectors from the condenser core.
INSTALLATION
1. To install, reverse the removal procedure.
-
If a new condenser core is to be installed, lubricate the refrigerant system with the correct amount of clean PAG oil or equivalent.
-
Install new O-ring seals lubricated in clean PAG oil or equivalent.
2. Evacuate, leak test, and charge the refrigerant system.
