Explorer 2WD V6-4.0L VIN K Flex Fuel (2002)
19. Carry out the following:
1
Connect the shift cable to the manual control lever.
2
NOTE: If installing a new shift cable, remove the band holding the shift cable adjustment lock in the unlock position.
Push the shift cable adjustment lock downward to the lock position.
20. Lower the vehicle.
21. Connect the battery ground cable.
22. Remove the 1.4 kg (3 lb) weight.
23. Verify that the engine will start in PARK and NEUTRAL and that the reversing lamps illuminate in REVERSE. If not, readjust the shift cable.
24. Check that the digital Transmission Range (TR) sensor adjustment is correct. Adjust the TR sensor if necessary.
