Explorer 2WD V8-4.6L VIN 8 (2006)
All vehicles
3. Position the liftgate opening weatherstrip aside.
4. Remove the rear upper headliner trim panel.
5. Remove the D-pillar trim panel.
6. To install, reverse the removal procedure.
Liftgate Trim Panel
LIFTGATE TRIM PANEL
Removal and Installation
1. Remove the 2 liftgate grab handle screws.
2. Remove the liftgate grab handle.
3. CAUTION: To avoid damaging the trim panel, do not pull the bottom of the panel outward.
Lift the liftgate trim panel by lifting upward to disengage the clips and remove the panel.
