Explorer 2WD V8-4.6L VIN 8 (2006)
Air Door Actuator / Motor: Service and Repair
Temperature Blend Door Actuator - RH, EATC
TEMPERATURE BLEND DOOR ACTUATOR - RH, EATC
Removal and Installation
1. Remove the RH floor console finish panel.
2. Lower the glove compartment.
3. Disconnect the RH temperature blend door actuator electrical connector.
4. Remove the 3 RH temperature blend door actuator screws.
5. Remove the RH temperature blend door actuator.
6. To install, reverse the removal procedure.
