Explorer 2WD V8-4.6L VIN 8 (2006)
E3
Normal Operation
The occupant classification sensor communicates with the diagnostic tool through the high speed controller area network (CAN), circuits VDB04
(WH/BU) and VDB05 (WH). Check the high speed CAN circuits between the occupant classification sensor C3159 and the data link connector
(DLC) C251. The total resistance values must not be more than 5 ohms. If the resistance is more than 5 ohms there is an open in one of the high speed
CAN circuits, damage to the DLC C251, damage to the occupant classification sensor C3159, or a problem in an in-line connector.
Possible Causes
-
high speed CAN data plus circuit VDB04 (WH/BU) open
-
high speed CAN data minus circuit VDB05 (WH) open
-
occupant classification sensor C3159
-
occupant classification sensor
Test F: The Four-Wheel Drive (4WD) Control Module Does Not Respond To The Diagnostic Tool
PINPOINT TEST F: THE FOUR-WHEEL DRIVE (4WD) CONTROL MODULE DOES NOT RESPOND TO THE DIAGNOSTIC TOOL
F1